| ISPcable III |
In-System Programer for Atmel AVR microcontrollers,
STK500 compatible. |
Connector pinout | Technical data | Buy ISPcable III
ISPcable III is an In-System Programer for Atmel AVR microcontrollers. ISPcable III gives the designer a compact and realiable programming tool to program most Atmel AVR microcontrollers through standard 6- or 10-pin ISP connector. The programmer connects to a PC through a USB interface and draws the necessary power from the computer eliminating the need for an additional power supply. ISPcable III can co-operate with microcontrollers supplied with voltages from 1.5 to 6 V. Such a broad range of supply voltages was achieved through buffering of signals on the ISP line, additionally enhancing the immunity of the circuit to interference. Thanks to STK500 compatibility it works witch Atmel AVRStudio programming environment and open source software like AVRDUDE.
Connector pinout
PINOUT DESCRIPTION
|
| MOSI |
SPI - data signal Master out / Slave in |
| LED |
LED diode and multiplexer signal |
| RST |
Target RESET control pin |
| SCK |
SPI - serial clock signal |
| MISO |
SPI - data signal Master in / Slave out |
| VCC |
Power supply from target circuit 1.5 - 6V |
| GND |
Programmer ground |
| Warning: Detailed description of power supply and programmer connecting can be found in user manual |
Technical data
ISPcable III
- Compatible witch STK500 v2
- Co-operates with Atmel AVRStudio software
- Programming of all AVR devices supported by AVRStudio and STK500 in ISP mode
- Connection to PC through USB port
- Buffering of the JTAG bus, allowing proper operation with systems powered from a broad range of supply voltages and enhancing immunity to external interference
- Operates with target voltages in the range of 1.8 - 6 V
- Supports LED signal for multiplexer controlling and programming indication
- Operation of the programmmer signalized by built-in LED indicator
- Standard 10-pin connector to the target circuit in the Atmel standard
-
No need for external power supply, power is taken from USB
-
The programmer can supply power to target circuit
- Small size
Download
Firmware upgrade
Buy ISPcable III
Price
Content of delivery package:
ISPCable III programmer
Cable terminated with IDC 10 plugs for connection of the emulator with the target circuit
USB cable for connection of the emulator with a PC
CD with documentation and software
Note: Net prices
Order in our Internet Shop
|
