| JTAGcable III |
In Circuit Emulator for Atmel AVR
microcontrollers compatybile with JTAGICE mkII. |
Features | Connection | Supported Devices | Accessories | Buy JTAGcable III
JTAGcable III is a tool for programming, real-time emulation in the target circuit and debugging of processors of the AVR family of Atmel microprocessors, equipped with an JTAG interface. It is fully compatible with the original AVR JTAGICE mkII from Atmel. Together with AVRStudio forms an up-to-date and professional environment for the start-up of programs written both in low-level (Assembler) and high-level (C) languages.
The AVR JTAGICE mkII from Atmel is a powerful development tool for On-chip Debugging of all AVR 8-bit RISC MCUs and AVR32 32-bit DSP/MCUs with IEEE 1149.1 compliant JTAG interface. It also support devices with debugWIRE Interface. debugWIRE enables on-chip debug of AVR microcontrollers in small pin count packages, using only a single wire for the debug interface.
The AVR Studio online-help contains the most current information and a complete list of supported devices.
Features
-
Compatible with AVR JTAGICE mkII
-
Co-operates with Atmel AVRStudio software and AVRDUDE
-
Allows emulation and programming in AVR microprocessor systems equipped with a JTAG, ISP and debugWire interface
-
Allows debugging of a code written both in Assembler and C language
-
Software upgradeing under AVRStudio
-
Connection to PC through USB port or RS232
-
Operation of the emulator signalled by three built-in LED indicators
-
Standard 10-pin connector to the target circuit in the Atmel standard
-
No need for external power supply, power is taken from USB
-
The programmer can be powered by external power supply
Connection with the target circuit
The connection to the target circuit should be realized through the attached 10-lead ribbon cable, terminated with standard IDC plugs with 2.54 mm raster. In case of using another cable it should be kept in mind that it should not be longer than 30 cm (~12 inches). The target device should be equipped with a JTAG connector with lead-out identical to that of the emulator JTAG connector. JTAG connector is compatible with Atmel standard.
|
DESCRIPTION OF TERMINALS |
|
TCK |
Test Lock - clock signal for the target circuit |
|
TDO |
Test Data Output - data signal for the target circuit |
|
TMS |
Test Mode Select - switching signal for the target circuit |
|
TDI |
Test Data Input - data signal from the target circuit |
|
Vref |
Line signalling the presence of supply voltage in the target circuit |
|
NSRST |
Reset input/output of taget circuit |
|
NTRST |
Not used |
|
GND |
Programmer ground |
Supported Devices
Below is a list of devices supported by the emulator. The current list is always available in the AVRStudio program.
- AT90CAN - AVR with on-chip CAN : AVR microcontroller with on-chip CAN
- ATmega AVR32 - FLASH Microcontroller Family
- ATmega AVR - FLASH Microcontroller Family
- ATtiny AVR - FLASH Microcontroller Family
Accessories
In our internet shop You can buy also:
Download
Buy JTAGcable III
Price
Contents of delivery package:
- JTAGcable III emulator
- Cable terminated with IDC 10 plugs for connection of the emulator with the target circuit
- USB cable for connection of the emulator with a PC
- RS232 cable for connection of the emulator with a PC
- Cables for 6-pin ISP, 10-pin ISP and JTAG without Reset signal
- CD with documentation and software
Note: Net prices
Order in our Internet Shop
| 
