Block Diagram | Evaluation Board | Download | Buy MMnetSAM7x

Features 

MMnetSAM7x minimodule

• Complete, ready to use microprocessor system
• Fast ARM7TDMI microcontroller AT91SAM7x 
• Up to 512kB Flash memory and up to 128kB RAM
• Onboard Ethernet PHY and RJ45 connector with embedded magnetics
• Serial DataFlash memory 64Mb (8MB)  
• Reset circuit
• Built-in 18.432MHz crystal resonator
• Onboard USB pull-up circuit
• Module supply voltage 3.3V
• 2 LED diodes indicating: power, LAN Full Duplex activity
• 2 x 40 terminals with 0.1" (2.54mm) pitch fitting every prototype board
• Small dimensions: 56mm x 48mm
• Available evaluation board and sample applications

AT91SAM7x microcontroller

• ARM7TDMI ARM Thumb Processor
• High-performance 32-bit RISC Architecture
• Leader in MIPS/Watt
• Fully Static Operation: Up to 55 MHz at 1.65V and 85°C Worst Case Conditions
• Internal High-speed Flash
• 128 to 512kB In System Programmable Flash memory
• Internal High-speed SRAM, Single-cycle Access at Maximum Speed
• 32 kB to 128kB of SRAM
• Memory Controller (MC)
• Reset Controller (RSTC)
• Clock Generator (CKGR)
• Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and one PLL
• Power Management Controller (PMC)
• Advanced Interrupt Controller (AIC)
• Debug Unit (DBGU)
• Periodic Interval Timer (PIT)
• Windowed Watchdog (WDT)
• Real-time Timer (RTT)
• Two Parallel Input/Output Controllers (PIO)
• Thirteen Peripheral DMA Controller (PDC) Channels
• One USB 2.0 Full Speed (12 Mbits per second) Device Port
• One Ethernet MAC 10/100 base-T
• One Part 2.0A and Part 2.0B Compliant CAN Controller
• One Synchronous Serial Controller (SSC)
• Two Universal Synchronous/Asynchronous Receiver Transmitters (USART)
• Two Master/Slave Serial Peripheral Interfaces (SPI)
• One Three-channel 16-bit Timer/Counter (TC)
• One Four-channel 16-bit Power Width Modulation Controller (PWMC)
• One Two-wire Interface (TWI)
• One 8-channel 10-bit Analog-to-Digital Converter, Four Channels Multiplexed with Digital I/Os
• SAM-BA Boot Assistance
• IEEE 1149.1 JTAG Boundary Scan on All Digital Pins
• 5V-tolerant I/Os, Including Four High-current Drive I/O lines, Up to 16 mA Each
• Power Supplies
• Embedded 1.8V Regulator, Drawing up to 100 mA for the Core and External Components
• Available in 100-lead LQFP Green and 100-ball TFBGA Green Packages
  
  

Ethernet PHY DM9161A

• Fully comply with IEEE 802.3 / IEEE 802.3u 10Base-T/100Base-TX
• Support MDI/MDI-X auto crossover function
• IEEE 802.3u Auto-Negotiation
• Selectable MII or RMII
• Selectable full-duplex or half-duplex operation
• LED status outputs indicate Link/Activity
• Single Supply of 3.3V
• Low power consumption
• Low power modes
• Campatybile with 3.3V and 5.0V tolerant I/Os
  

Block Diagram 

Terminals layout 

Module Dimensions 

Evaluation Board 

More...

Download

MMnetSAM7x

AT91SAM7x

AT91SAM7x

Ethernet PHY DM9161A

DM9161A

Demonstration software

Software available at internet:

• Software delivered with IAR Embedded Workbench, available 30-day evaluation version and KickStart edition with 32kB limitation. Software includes: LCD, I/Os, RTT, Interrupts. 
• Software delivered with Rowley CrossWorks
• Webserver demo provided with FreeRTOS. Three versions available: for Rowley CrossWorks, for Eclipse + GCC and for IAR Embedded Workbench.
• AT91SAM Internet Radio

Buy MMnetSAM7x

Note: Net prices